ComplianceApp

Menu

Australia / Northern Territory

Building compliance for Northern Territory builders and trades

National checks

NCC edition in force: NCC 2022
NT has not announced an NCC 2025 adoption date.

Ask or photo a defect for the Northern Territory and get the cited NCC or standard clause. Checklists for each trade when you want the full list.

What's different in Northern Territory

Regulator: NT Building Advisory Services and Building Practitioners Board

Which NCC edition applies

The NT hasn't adopted NCC 2025, so NCC 2022 still applies. Check NT.GOV.AU for any change.

Source

Private certifiers

Registered building certifiers issue permits and inspect work at mandatory stages, typically pre-pour, frame, block wall, wet area and final.

Source

Work stops at each stage

Work can't continue past a stage until the certifier has inspected and authorised it.

Source

Coverage for Northern Territory

What answers draw onNCC and the standards it references, plus NT Building Act and Building Regulations.
111Trade checklistsNational items for every trade

See what's covered.

Example checklist items

From the free sample checklist, as shown to NT users.

Open the checklists

FAQ

Who issues building permits in the NT?

Registered private building certifiers.

Source

Check your next job against the rules

Free to start: ask a question or photograph a defect and get the clause. Paid plans add your trade's full checklists.

Try it free See plans

ComplianceApp supplements, and doesn't replace, advice from a registered building surveyor, certifier, engineer or licensed practitioner. NCC and ABCB content is provided by the Australian Building Codes Board under Creative Commons licences (CC BY 4.0, or CC BY-ND 4.0 where marked on the source). The ABCB doesn't endorse this tool. Disclaimer.